Differences between winter and Summer Tires

car service

People use their cars less in winter than within the summer. However, over half all driving accidents occur during the cold months. Several of those are right down to the very fact that people overestimate the number of distance it takes to interrupt within the weather condition. In several places wherever the temperatures plummet and there are extreme seasons, car drivers switch to special tires for this period. What are the most variations between summer and winter tires, and once must you put them on your vehicle?

Materials

During the first days of driving some bright spark noticed that the bouncy summer tires they were using to save the bottoms of their affluent conveyance passengers slid concerning on icy roads. At first, this caused some head-scratching moments, because the early tire pioneers wondered why their soft summer tires didn’t grip the cold road. This was till somebody observed that this was all the way down to the fact that the tires were freezing, creating them hard and unable to deal with rugged and frozen surfaces. a couple of apologies and a handful of hat doffing moments later, another clever clog invented tires that were made from a temperature resistant rubber that keeps its flexibility in even sub-zero conditions, which is way simpler at gripping the road’s surface. Jokes aside, this is often achieved by putting larger amounts of silicon into the rubber combine, which makes it more pliable at colder temperatures.

Grooves and Patterns

No, we’re not talking about creating knitwear for a cool night out – we’re talking regarding the tread that features on tires, providing them with the higher grip on the road. Believe it or not, winter tires truly work by collecting snow in their grooves that provides a better grip on icy roads than a plain rubber tread. As a result, winter tires tend to own a bigger amount of grooves on their surface than a standard summer tire, and these grooves also tend to be deeper and wider.

Reduction in Braking Distance

So currently we’ve filled you in on however summer and winter tires are made, what variations are you able to expect to feel behind the wheel of your petrol slurping SUV as you navigate your favorite roads at top speeds? Well, you actually won’t need to be pushing the pedal to the metal within the colder months if you’re driving with summer tires on your automobile as this can increase your braking distances dramatically. On snow, driving at 30mph it’ll take forty-three meters to brake with summer tires as opposition 35 meters with winter tires. On the ice, you’ll slip and slide for nearly 70m once braking at simply 20mph with summer tires, with winter tires, sound 10m off that distance.

Durability

We already know what your next queries are getting to be – “if winter tires are therefore nice, then why not match them to your automobile all year round?” Well, there’s a simple reason why you would like to change back to summer tires throughout the warmer months – durability. Winter tires that are made of a softer rubber compound can wear out a lot of quicker than summer tires, cost accounting you cash to switch them. The grip also will wear out on winter tires, affecting your fuel potency and driving up your fuel consumption prices. With the worth of fuel skyrocketing year in year out, this won’t be a decent factor for your car or your bank balance

When to fit Winter Tires and Summer Tires

No doubt we’re planning to raise some eyebrows if we build the apparent purpose that winter tires have to be compelled to continue you’re automotive throughout the colder months of the year. Thus if you’re living in Tasmania, an island located in Australia, then you’ll need to place your winter tires on throughout June and July. Those of us who reside within the good previous northern hemisphere, wherever the winters are colder and therefore the roads considerably a lot of congested, can need to alter their summer tires over to winter tires in late October or a minimum of by period of time and so back once more in early April.

Checking and Adding Fluid to Power Steering

car service

Power steering aids drivers by providing a level of power and support to the steering process, augmenting the effort supplied by the driver. This is usually automated via a system of hydraulics that uses a pump and reservoir, which sits on the engine. The fluid within the hydraulics is then applied to the steering gear through a set of hoses, and the pressure is used to reduce the amount of force needed to successfully steer the vehicle.

Checking your Car’s Power Steering Fluid

It is a very quick and simple task to check your car’s power steering fluid, which can be performed in a matter of moments. It is advisable to only ever perform these checks with the engine completely off and cooled to avoid any chance of injury from moving parts. We would also recommend that you park your car on a flat, level surface to ensure that the fluid is evenly distributed throughout the system. Take the following steps to check the fluid:

–       Locate the reservoir – this is usually located on the side of the engine with a number of tubes attached to the outside of the unit. If you are having trouble locating this part, then directions can be normally found in your owner’s manual.

–       Unscrew the cap – taking care to wipe the cap in order to ensure that no dirt falls into the reservoir. Often there will be a small dipstick attached to the underside of the cap that shows the level of the fluid within the system.

–       Check the level – there should be three marks either located on the cap’s dipstick or in some cars, there will be a transparent reservoir with the marks located on the outside of the unit. These are usually hot, cold and add. The hot mark indicates the safe level for the fluid when the engine is running and the cold level when the engine is static. If the level is at the add mark then you need to add extra fluid to the system.

Adding Power Steering Fluid

If the level of fluid in the system reaches the add marker, then it is time to top up the power steering fluid in your system. There are different types of fluid available, with older systems sometimes using transmission fluid, whilst dedicated liquids are used in later models. The type your car uses should be clearly indicated in the shop service or owner’s manual. After unscrewing the reservoir cap, carefully add fluid to the required level before fixing the cap firmly back into place.

Engine Maintenance Tips – Must for a Good Car Care

car service

Keep Your Engine Fit and Functional

An engine is like the heart of an auto. It must run smoothly so as to keep your automotive moving. I can’t emphasize more on however necessary it’s to keep the engine fit and functioning with efficiency. Here are some engine maintenance tips that’ll facilitate your engine run forever:

1.Keep check on the cooling system

Even though we’ve come back a long way in terms of efficiency of a car engine, a lot of energy is lost during combustion within the type of heat. Metals and alloys, that your car engine is formed out of, aren’t very good friends with heat. Continually ensure there’s ample agent within the tank as it is extremely necessary for heat dissipation. A 1:1 ratio of coolant and water is ideal. Also, it’s a good issue to seem at the engine temp gauge on a hot sunny day and shut your car down in case it’s near overheating.

2. Change engine oil at regular intervals

This is the least you’ll be able to do. The engine oil keeps all moving parts well lubricated so that wear and tear is minimal. Also, it traps all the dust, dirt, and sediments, keeping them out of places they shouldn’t be. Check oil levels each month and top up if the amount is low. Oil grade and alter intervals are subject to the manufacturer’s recommendations. The filter is equally important because it filters all the junk from the oil and stops regulation back to the engine. This will make sure that your engine runs smooth and cool.

3.Let it breathe

A constricted air flow will cause the fuel to not burn completely, in turn increasing emissions and reducing mileage. Check the air cleaner and obtain it cleaned/ modified whenever you feel there are too much dirt and scrap stuck to it. Your engine needs to breathe properly to function well and keep going.

4.Look for leaks

When you pull out of the private road, stop and look at the parking spot for any fluids on the ground. If the fuel is leaking, you should visit the nearest mechanic and get it checked. You’ll also check under the hood to see or smell something leaking. Engine oil and liquid are fluids you should look out for once checking for leaks.

Check Engine Light ON

Check Engine light ON

Looking for the best Car Service in Dubai

GT Auto Centre Team offers the full range of car service in Dubai from simple oil changes to car engine repair, AC reconditioning to full body car services, for all makes of cars.Being western owned and run we understand well the importance of quality, reliability, and transparency in car service.  When it comes to car service in Dubai, Customer care, and service excellence is at the heart of our business philosophy and at every point of your interaction with the GT Auto Centre Team.

BMW 1 Series common problems  

BMW Service in dubai

With a true flashy feel behind the wheel and also the classic BMW styling, this is often an excellent automotive that will keep its value for years. Even with the rear wheel drive set-up, it manages to supply a consistent ride quality throughout its years. However, like all vehicles, it’s not completely rattle-free and there are many known problems to look at out for once buying a second-hand model.

Steering

Have a glance at your potential purchase’s front tires. Is that the wear uneven across the pair? If this is often the case then the most likely cause may be a reported problem with a faulty steering rack, which is known to throw out the tracking on the front wheels. Also, many cars were recalled during the period between June 2007 and December 2011 wherever the integrated control module wasn’t up to specification and could turn the ability steering off.

Turbocharger

Keep one eye out for an excessive quantity of smoke coming out of the engine upon acceleration after you are taking this BMW hatchback for a test drive. Known problems with the turbocharger are the likely origins of this problem that is at risk of failure and can need replacement.

Brakes

If the BMW one Series you’re looking at was factory-made during March 2006 then it could be subject to a drag with a seal on the brake, which suggests that the brakes won’t operate at the most level of effectiveness. Make sure that you simply try an emergency stop procedure with any car you wish to buy from this period, and confirm it slows down below normal stopping distance.

Airbag

Cars from the second quarter of 2008 were known to suffer from airbag issues, which mean that the bag won’t deploy properly in the event of a crash. This is often due to faults within the BMW hatchback’s safety belt tensioned and the wiring harness, which can cause it to fail. Once more check the service history to envision if these parts are replaced.

Door Handles

There is a known issue with the door handles on the one Series. try all the handles around the car. Will any single unit stick out of the door once you close the door? If so then the catch and handle may well be broken, requiring an entire replacement of each component.

Manual Gearbox

If you’re thinking of buying a one Series that suffers from a very stiff gear change once the automotive is initial motoring on the road, be aware that this isn’t a fault. The automotive simply wants a little time to heat up and normal service should be rebuilt once the vehicle is out on the open road.

 

OIL CHANGE SERVICE

car service

One of the simplest things you can do to keep up your auto is to bring it for regular oil change. With oil change at standard intervals, it will expand the life of the vehicle and it will also help sparing cash from a major breakdown.

The filter is important as a result of it will filter pollutants, contaminants, and different debris. It’ll then enable the clean oil to filter through to components of your engine to assist it to run effectively. The most important advantage of changing oil is it prevents dirt and debris from building up. This will cause harm to components of your engine. This is often very true if you drive in dirty or dusty conditions. Changing the oil and filter will help to stop the debris from getting into the engine. Regular oil changes will help keep the engine and different components clean and working efficiently. This will facilitate to produce a smoother and quieter ride once you are driving.

When should I change the oil in my car?

As oil collects heat, varnish, and carbons throughout the course of protective and keeping the engine running smoothly, it eventually becomes less like liquid and a lot of like sludge. No matter however good the oil is, eventually it degrades because the additives get used up. This is often the right time to change the oil. As a thumb rule, one should modification the oil after each 5000 kilometers.

Benefits of changing oil:

Having regular oil changes done will help to enhance the fuel efficiency of your vehicle. This is because the new clean oil can help reduce the friction that’s in the engine. The friction will start to slow down the engine and will then result in poor mileage.

Changing Your Exhaust

exhaust Dubai

All combustion motors, regardless of whether they are diesel, petrol, liquor or bio-fuel driven, create emanations. These frequently risky gasses are ejected from the vehicle through the exhaust system. This is associated directly up to the cylinder exhibit in the engine and used to funnel all the waste fumes out of the barrel heads. The exhaust has many parts,

  • Catalytic converter
  • Muffler and tailpipe
  • Exhaust manifold

To change the exhaust, you need to follow these steps:

  1. Assess the parts needed

The initial step is to work out what parts of the exhaust you have to change – are there issues with the exhaust system or is the tail-pipe damaged? Ensure you have the right new parts previously you start your work by contrasting them with the old parts to ensure they’re a similar size and shape.

  1. Jack up your car

You’ll have to get underneath your auto so as to change your fumes. Try not to utilize only a jack in this example – you’ll need to ensure that you bolster the front wheels too either on squares or slopes and it’s crucial in this circumstance to ensure that you have the brakes fully locked on.

  1. Unbolt the old parts

Next, unbolt the old parts from the base of the auto. With a specific end goal to do this you may very much need a sliding backboard to give yourself simple access to the underside of your vehicle. You’ll need to begin the unbolting procedure at the back of the auto and gradually work your way towards the front. As the bolts are presented to all kinds of grit, water, and soil on the base of your auto, they’ll frequently be rusted in place. You may need to utilize some sort of oil spray or a torque and mallet to get them loose.

  1. Remove the exhaust

After you’ve removed the last jolts you’ll have to expel the fumes from its holders. As new depletes are regularly provided with new hangers you can frequently get away with cutting the old exhaust free from its holders and disposing of the old parts.

  1. Attach new exhaust

When you’re attaching the new exhaust you should turn around the request in which you took unbolted the part from the auto.

Car Air-Conditioner:How It Works

car repair Dubai

We attempt to clarify the workings of one of the essential highlights found in all autos now – An air-conditioner. This is something that can make its quality felt when it conks off on a hot summer day or a muggy storm evening. As your auto gets older, the car air-conditioner should be subjected to periodic maintenance. How about we look how the framework functions and some normally watched issues and possible solutions.

An air-conditioner works on the same principle as your room air-conditioner. The central guideline included is a heat-exchange. A refrigerant gas (now usually utilized is R134-a) that powers the change of liquid to gas and back to liquid, and in the process, it releases heat. Heat is absorbed when it expands.

The compressor of an AC, packs the low-pressure gas into high-pressure, warming it up in the process. The condenser and the fan force this gas to chill off, transforming it into a high-pressure liquid form, losing a portion of the heat in the process. This liquid high-weight refrigerant moves through an extension valve just before it enters the cabin, enabling it to grow, reducing pressure and further cooling it down.

There is safety valve built with the compressor. First, if there is low refrigerant in the system the compressor won’t turn on. Besides, a fuse or a relay that powers the compressor could have broken down. This is typically caused by water entering the system or broken wiring. The third motivation behind why the compressor isn’t starting up can be simply the compressor itself going bad. The same is ordinarily portrayed by indications like oil spilling out of it, strange squeaking and rattling noise leaving the compressor. Supplanting the compressor is a costly affair; ensure you check altogether to guarantee that if indeed the compressor is at fault.

To expand the life of your AC compressor, it is encouraged to get the system checked each 2-3 years, along with topping up of the refrigerant, including a couple of ml of compressor oil to keep it lubricated. If your used auto is giving you visit inconveniences, and you expect to auction it, look no more remote than CARS24. We offer you the best cost in the market, instant payment, and free RC transfer.

Checking your Car’s Brake Fluid

brake pads Dubai

Brake liquid assumes a vital role in your auto. This fluid exchanges the power of the driver’s foot on the brake pedal through to the circle brakes. It utilizes an arrangement of tubes and weight, similar to those that you may discover on a hydraulic piston, to work every one of the brakes at the same time. It is basic that you have the correct level of brake fluid in your auto.

How to Check your Brake Fluid

  1. Level your car

The initial step is to guarantee that your auto is parked on a level and flat surface so the brake fluid in the repository will also be level. Additionally, ensure that the motor is off and has completely cooled.

  1. Locate the Reservoir

Open the front bonnet and discover the brake fluid store. This is typically situated on the driver’s side of the motor. It would appear that a little cylindrical fluid holding device.

  1. Check the levels

On most autos, there are two levels, min and max that show the right and safe levels of brake fluid inside the motor. These are generally situated on the outer side of the reservoir.

Checking the Condition of the Fluid

In more established autos the facts may confirm that the state of the brake liquid has completely deteriorated. Ordinary brake fluid should have dull colored shading with a level of clarity. If the fluid has taken on very dark shading then this could show that your fluid is tainted by excess water, which as we expressed above can influence its execution and it could need changing out. This is an occupation that is best performed by a completely prepared mechanic at a garage.